北星文化｜MADWORKS ｜類鑽石塗層替換式雕刻刀｜D.L.C. Line Engraver

【 MADWORKS ｜類鑽石塗層替換式雕刻刀｜D.L.C. Line Engraver 】

★ D.L.C金屬塗層
★ 適用於模型刻線作業
★ 刻挖凹槽，加深模型細節立體感

D.L.C（類鑽石塗層）是一種頂級的金屬保護塗層，經常使用在高級名錶上。我們將保護塗層用在刻刀上，不只增加了刀具硬度！並研發出對鋼摩擦係數非常低的刀具，進而提升稅利度與使用手感！同時也提高了耐磨蝕性，使用後將會有全新的模型製作體驗。

★ 使用方式：建議使用田宮（74098）或OFLA（AK-4）的筆刀捍為握把，並使用慣用手拿取，針對塑膠模型（ABS、PVC）、樹脂模型、環氧樹脂，皆可正常使用。建議將刀鋒貼平模型零件刻劃，請勿過度用力曲折刀鋒，會造成刀鋒崩壞，影響工具精密度。

★ 編號代碼：
Z50010DLC (0.1MM)
Z50015DLC (0.15MM)

★ 尺寸：刀具外徑3.0 mm

★ 注意事項：
1.12歲以下孩童需要由家長陪同操作使用
2.金屬精密工具，請勿重摔，正常操作可使用兩年以上
3.本工具針對塑膠模型設計，請勿在金屬零件上使用
4.金屬工具皆經過表面防銹處理，會依照使用空間環境會有保存的差異，建議保存空間儘量避免濕氣
5.避免與其他金屬工具碰撞，容易造成損耗，並定期使用矽油保養防銹

++++++++++++++++++++++++++++++++++++
D.L.C. (Diamond-like Carbon) coating is a protective coating for metal, often used on expensive watches. When we applied this technology onto our blades, not only did we heighten their hardness, but we also create blades that are low-friction and fretting-resistance. This means D.L.C. Line Engravers are sharp and easy to handle, taking you to a whole new level of scribing experience.

★ How To Use：Attach the blade to a knife handle. We recommend Tamiya 74098 or OFLA AK-4, as well as MADWORKS MH-01. D.L.C. Line Engraver can scribe plastic model kits (ABC/PVC), resin kits, and epoxy kits. Make sure the blade follow the contour of the scribing surface. Do not use excessive force. Excess impact may damage the blade.

★ Codename：
Z50010DLC (0.1MM)
Z50015DLC (0.15MM)

★ Warning：
1.Children 12 or under must obtain the help of an adult assistant.
2.D.L.C. Line Engraver is a precision tool. Do not drop and avoid heavy impact. Under normal operation the blades can last two or more years.
3.D.L.C. Line Engraver is designed to be used on plastic / resin / epoxy surface. Do not use on metal surface as this will damage the blade.
4.Rust treatment has been applied to the metal surface. Keep in a dry place.
5.Do not impact with other metal surfaces. Apply silicone grease/oil regularly for rust prevention and maintenance.